Description
The XPR Series (Eres) Hazardous Location LED Area Light is designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambient temperature can be expected. For use in locations made hazardous by the presence of… The XPR Series (Eres) Hazardous Location LED Area Light is designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambient temperature can be expected. For use in locations made hazardous by the presence of flammable vapors, gases, or combustible dusts as defined by the NEC. XPR fixtures are available in 45W and 65W in class C1D2. The XPR is ideal for retrofit of existing HPS/MH and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks. Read More
- Construction Die-cast, copper-free aluminum housing Chimney type structure design improves heat dissipation, increasing lifespan Stainless steel hardware Weight - 10.8 lbs 3/4” NPT threaded conduit/wire access port or multi-mount attachment points RoHS Compliant RAL 7037 (Dusty Gray) polyester powder coat
- Optical System Tempered glass creates uniform light distribution and maximizes lumen output Diffused lens optional** CCT: 3000K**, 4000K**, or 5000K CRI: 70+ **Consult factory for availability
- Electrical Input voltage of 100-240/277VAC or 347-480VAC (45W only)** Input frequency of 50/60Hz Power Factor of ≥.95 THD <20% 10kA surge protector Reported L70 hours >50,000 Ambient Operating Temperature -40°F (-40°C) ~ 131°F (55°C) C1D2 T4A at 131°F (55°C) C2D1 T5 at 131°F (55°C) C2D2 T5 at 131°F (55°C) Ambient Operating Humidity of 10%~90% RH **Consult factory for availability
- Installations Available in Multi-Mount or Pendant Mount options Multi-mount stanchion and wall mount accessories available in 25° and 90° options Pendant Mount adjustable trunnion bracket available for ceiling, wall, etc. Pendant Mount uses 3/4” NPT For installations where power surge may be possible, NICOR recommends installing additional surge protection at the electrical distribution panel
- Full Listings Class I Division 2, Group A, B, C, D Class II Division 1, Group E,F, G Class II Division 2, Group F, G Class III UL 844 Hazardous Location UL 1598 Wet Locations UL 1598A, Marine UL 8750 LED Safety IP66 Rated CSA C22.2 No. 250.0-08, 250.13 IECEx Meets FCC Part 15, Subpart B, Class B standards for conducted and radiated emissions
- Warranty 5-year limited system warranty standard Warranty does not cover product failure due to an overvoltage event (power surge)
Warranty Information
